User's Manual
Table Of Contents
- WiFi Cable Modem Router C3700
- Contents
- 1. Connect to the Modem Router
- 2. NETGEAR genie Basic Settings
- 3. NETGEAR genie Advanced Home
- 4. Security
- 5. Administration
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Administration
43
WiFi Cable Modem Router C3700
The following screen displays.
2. In the Utility list, select Ping.
3. Specify the following parameters for the ping utility .
• Target. The IP address of the ping target computer.
• Ping Size. The size (in bytes) of the ping packet.
• No. of Pings
. The number of times to ping the target computer
.
• Ping Interval. The time between pings.
4. Click Start Test
.
The ping results display.
To stop a ping test:
Click Abort Test.
To clear the results from the display:
Click Clear Results.
Traceroute Utility
To display the route and measure transit delays of packets across an IP, run the traceroute
utility.
To run a traceroute test:
1. From the Advanced tab, select Administration > Diagnostics.