User's Manual
Table Of Contents
- WiFi Cable Modem Router C3700
- Contents
- 1. Connect to the Modem Router
- 2. NETGEAR genie Basic Settings
- 3. NETGEAR genie Advanced Home
- 4. Security
- 5. Administration
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Administration
41
WiFi Cable Modem Router C3700
Erase sets the user name to admin, the password to password, and the LAN IP address to
192.168.0.1, and enables the DHCP of the modem router.
Set Password
This feature allows you to change the default password that is used to log in to the modem
router with the user name admin.
This modem router password is not the same as the password for wireless access. The label
on the bottom of your modem router shows your unique wireless network name (SSID) and
password for wireless access (see Gateway Label on page 10).
To set the password for the user name admin:
1. From the Advanced tab, select Administration > Set Password
.
The following screen displays.
2. Type the old password.
3. Type the new password in the Set Password field.
4. Type the new password in the Repeat New Password field.
5. Click the Apply
button.
Your changes take effect.
View Event Logs
Event logs capture important modem router events.
To view the event logs:
From the Advanced tab, select Administration > Event Log.