User's Manual
Table Of Contents
- WiFi Cable Modem Router C3700
- Contents
- 1. Connect to the Modem Router
- 2. NETGEAR genie Basic Settings
- 3. NETGEAR genie Advanced Home
- 4. Security
- 5. Administration
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Administration
35
WiFi Cable Modem Router C3700
View Modem Router Status
To view modem router status and usage information:
From the Advanced tab, select Administration > Gateway Status.
The following screen displays.
Cable Information
The following settings are displayed:
Hardware Version. The modem router model.
Firmware V
ersion. The version of the modem router firmware. It changes if you upgrade the
modem router firmware.
Cable Modem Serial Number. The serial number of the cable modem.
CM certificate
. The status of the cable modem certificate. If ‘Not installed’ displays as the
status, contact your Internet service provider
.
CM MAC. The MAC address of the cable modem.
LAN Port. The MAC address of LAN port 1.
• MAC Address
. The Media
Access Control address. This address is the unique physical
address that the Ethernet (LAN) port of the modem router uses.
• IP Address. The IP address that the Ethernet (LAN) port of the modem router uses.
The
default is 192.168.0.1.
• DHCP Server. Identifies whether the built-in DHCP server of the modem router is active
for the LAN-attached devices.
To reboot the modem router, click the Reboot button.