User's Manual

Wireless Configuration
17
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
If it works with WPS, it has a WPS utility and might also have a WPS button that you can
press.
2. Log in to the gateway.
For more information, see Log In to Your Gateway on page 10.
3. In the main menu, select Add WPS Client.
4. Click Next.
The Add WPS Client screen displays:
5. Either click the WPS button, or press the button on the front of the gateway.
• The WPS LED on the front of the gateway begins to blink.
• The gateway tries to communicate with the wireless computer or device for 2 minutes.
• If the security option in the Wireless Settings screen was set to Disable, it is
automatically changed to WP
A-PSK [TKIP] + WPA2-PSK [AES], including a random
wireless security password.
6. Go to the wireless computer, and run its WPS configuration utility.
7. T
o click the WPS button, follow the utility’s instructions.
When the computer connects to the wireless network, the gateway sends its SSID and
WP
A-PSK or WPA2-PSK configuration to that computer.
8. On the computer that just joined the wireless network, make sure you can connect to the
Internet.