User's Manual
Table Of Contents
- N450 Wireless Router WNR2500
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. genie Basic Settings
- 4. genie Advanced Home
- 5. Security
- 6. Administration
- 7. Advanced Settings
- 8. Monitoring
- 9. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
genie Advanced Home
62
N450 Wireless Router WNR2500
Bandwidth Control
Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the
router to the Internet.
To set the maximum uplink bandwidth:
1. Select Advanced > Setup > QoS Setup.
The QoS Setup screen displays:
2. Select the Turn Bandwidth Control On check box.
3. Select the Automatically check Internet Uplink bandwidth radio button.
4. Click the Check button.
The router detects the available uplink bandwidth. After about 1 minute, the available
bandwidth displays onscreen.
This information can help you to determine the maximum
bandwidth setting that you want to allow.
5. Select the Uplink bandwidth
radio button.
6. Enter the maximum bandwidth that you want to allow , and select either Kbps or Mbps.
7. Click the Apply
button.