User's Manual
Table Of Contents
- N450 Wireless Router WNR2500
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. genie Basic Settings
- 4. genie Advanced Home
- 5. Security
- 6. Administration
- 7. Advanced Settings
- 8. Monitoring
- 9. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
Getting Started with NETGEAR genie
24
N450 Wireless Router WNR2500
Some older WiFi equipment is not compatible with WPS. WPS works only with WPA2or WPA
wireless security.
To use WPS to join the wireless network:
1. Press the WPS button on the router front panel
.
The WPS LED (on the button) starts to blink green.
2. Within 2 minutes, press the WPS button on your wireless device, or follow the WPS
instructions that came with the device.
The device is now connected to your router.
3. Repeat steps 1–2 to add other WPS wireless devices.