User's Manual

Extender Network Settings
23
High Power WiFi Extender EX6200
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting!
4. Close the message window.
 To erase settings:
Under some circumstances (for example, if you have lost track of the changes that you made
to the extender settings), you might want to erase the configuration. After an erase, the
extender returns to its factory settings (see Factory Settings
on page 31).
To erase the configuration, click the Erase button in the Backup Settings screen. The
extender automatically shuts down and reboots with its factory settings.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting!
Set the Password
The user name to access the extender is admin, and its default password is password.
NETGEAR strongly recommends that you set a more secure password.
 To set the password:
1. Select Maintenance > Set Password. The following screen
displays:
2. Type the old password, type the new password twice, and then click Apply.