User's Manual
Table Of Contents
- C3000 WiFi Cable Modem Router
- Contents
- 1. Connect to the Modem Router
- 2. NETGEAR genie Basic Settings
- 3. NETGEAR genie Advanced Home
- 4. Security
- 5. Administration
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Advanced Settings
59
C3000 WiFi Cable Modem Router
2. Select the Port Triggering radio button.
3. Clear the Disable Port Triggering check box if it is selected.
Note: If the Disable Port Triggering check box is selected after you configure
port triggering, port triggering is disabled. However, any port triggering
configuration information you added to the modem router is retained even
though it is not used.
4. In the Port
T
riggering Time-out field, enter a value up to 9999 minutes.
5. This value controls the inactivity timer for the designated inbound ports. The inbound ports
close when the inactivity time expires.
This step is required because the modem router
cannot be sure when the application has terminated.
6. Click the Add Service button.
The following screen displays: