User Manual
Table Of Contents
- R6100 WiFi Router
- Contents
- 1. Hardware Setup
- 2. Getting Started
- 3. Basic Settings
- 4. Advanced Home Settings
- 5. USB Storage
- 6. Security
- Keyword Blocking of HTTP Traffic
- Block Services (Port Filtering)
- Port Triggering to Open Incoming Ports
- Port Forwarding to Permit External Host Communications
- How Port Forwarding Differs from Port Triggering
- Set Up Port Forwarding to Local Servers
- Set Up Port Triggering
- Schedule Blocking
- Security Event Email Notifications
- 7. Administration
- 8. Advanced Settings
- 9. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
USB Storage
53
R6100 WiFi Router
2. Click the Create Network Folder button.
If the Create a Network Folder screen does not display, your web browser might be
blocking pop-ups. If it is, then change the browser settings to allow pop-ups.
3. In the Folder field, browse and select the folder.
4. Fill in the Share Name field.
5. In the Read
Access list and the Write Access list, select the setting that you want.
The user name (account name) for All – no password is guest. The password for admin is
the same one that is used to log in to the router. By default, it is password.
6. Click the Apply button.
The folder is added on the USB device.
To edit a network folder:
1. Select ADV
ANCED > ReadySHARE.
2. Click the Edit button.
The Edit Network Folder screen displays the same settings shown in the Create a
Network Folder screen.
3. Change the settings in the fields as needed.
4. Click the Apply button.
Your changes are saved.
Specify Approved USB Devices
For more security, you can set up the router to share only approved USB devices.
To set up approved USB devices:
1. Select ADV
ANCED > Advanced Setup > USB Settings.