User's Manual

Advanced Settings
87
R6250 Smart WiFi Router
Tip: You can copy and paste the MAC addresses from the Attached Devices
screen into the MAC Address field of this screen. To do this, use each
wireless computer to join the wireless network. The computer should
then appear in the Attached Devices screen.
5. Click Add.
The screen changes back to the list screen.
6. Add each computer or device you want to allow to connect wirelessly
.
7. Select the Turn Access Control
On check box.
8. Click Apply.
 To edit a wireless device or delete it from the access list:
1. Select Advanced > Advanced Setup > W ireless Settings.
The Advanced Wireless Settings screen displays.
2. In the table, select the radio button next to the wireless device that you want to edit or
delete.
3. Do one of the following:
• Click the Edit
button.
The Edit Wireless Card screen displays.
a. Edit the address information.
b. Click the Accept button.
• Click the Delete button.
The address is removed from the table.
Wireless Access Point (AP)
You can set up the router to run as an access point (AP) on the same local network as
another router.
 To set up the router as an AP:
1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the
other router.
Cable this port to a LAN port
on the other router
2. Select Advanced > Advanced Setup > W ireless Settings.