User's Manual

Security
71
R6250 Smart WiFi Router
 To enable port triggering:
1. Select Advanced > Advanced Setup > Port Forwarding/Port T riggering.
2. Select the Port Triggering radio button.
3. Clear the Disable Port Triggering check box.
Note: If the Disable Port Triggering check box is selected after you
configure port triggering, port triggering is disabled. However, any
port triggering configuration information you added to the router is
retained even though it is not used.
4. In the Port Triggering Timeout field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires.
This is required because the router cannot be
sure when the application has terminated.
 To add a port triggering service:
1. On the Port Triggering screen, click Add Service.
2. In the Service Name field, type a descriptive service name.
3. In the Service User list, select Any, or select Single address and enter the IP address of
one computer.