User's Manual
Table Of Contents
- R6250 Smart WiFi Router
- Contents
- 1. Hardware Setup
- 2. Getting Started
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
NETGEAR genie Basic Settings
29
R6250 Smart WiFi Router
View Attached Devices
Use the Attached Device screen to view all computers or devices that are currently
connected to your network.
To go to the Attached Devices screen:
1. From the Basic Home screen, select Attached Devices.
Wired devices are connected to the router with Ethernet cables. Wireless devices have
joined the wireless network. The following information is displayed:
• # (number). The order in which the device joined the network.
• IP Address. The IP address that the router assigned to this device when it joined the
network. This number can change if a device is disconnected and rejoins the network.
• MAC Address. The unique MAC address for each device does not change. The MAC
address is typically shown on the product label.
•
Device Name. If the device name is known, it is shown here.
2. Click Refresh
to update this screen.