User's Manual
Table Of Contents
- R6200v2 Smart WiFi Router
- Contents
- 1. Hardware Setup
- 2. Getting Started
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
NETGEAR genie Advanced Home
40
R6200v2 Smart WiFi Router
category, which receives a lower priority than voice and video. WMM QoS is enabled by
default.
To disable WMM QoS:
1. Select Advanced > Setup > QoS Setup.
2. Clear the Enable WMM check box for the band (2.4 GHz or 5 GHz).
3. Click Apply.
Set Up Bandwidth Control
To set up the maximum uplink bandwidth:
1. Select Advanced > Setup > QoS Setup.
2. Leave the Enable WMM check boxes selected.
3. (Optional)
To prioritize Internet traffic, select the Turn Internet Access QoS On check box.
4. (Optional)
To detect the current uplink bandwicth, click the Check button.
This helps you to determinate the maximum bandwidth setting
5. Select the T
urn Bandwidth Control On check box.
6. Use one of these methods to specify the maximum bandwidth:
• To use the current uplink bandwidth, select the Uplink bandwidth radio button.
• Select the Automatically check Internet uplink bandwidth radio button.
7. Click Apply.