User's Manual

Administration
93
D6200 WiFi Modem Router
Upon completion, the WiFi modem router reboots.
WARNING:
Do not interrupt the reboot process.
Erase
Under some circumstances (for example, if you move the WiFi modem router to a different
network or if you have forgotten the password), you might want to erase the configuration
and restore the factory default settings.
Either you can use the Restore Factory Settings button on
the back of the WiFi modem router
(see Factory Settings on page 14
1), or you can click the Erase button in this screen.
Erase sets the user name to admin, the password to password, and the LAN IP address to
192.168
.1.1, and enables the WiFi modem router’s DHCP.
Set Password
This feature allows you to change the default password that is used to log in to the WiFi
modem router with the user name admin.
This procedure is not the same as changing the password for
wireless access. The label on
the bottom of your WiFi modem router shows your unique wireless network name (SSID) and
password for wireless access (see Label on page 12
).
 To set the password for the user name admin:
1. Select ADVANCED
> Administration > Set Password to display the following screen: