User's Manual

Hardware Setup

D6200 WiFi Modem Router

Back Panel

The back panel has the Power On/Off button and port connections shown in the figure:

4. Gigabit Ethernet

7. Power

1. ADSL line

6. AC power

2. USB port

3. Gigabit Ethernet

5. Reset button

On/Off button

adapter input

WAN port

LAN ports

Figure 3. Back panel port connections

Viewed from left to right, the back panel contains the following elements:

1. RJ-11 asynchronous DSL (ADSL) port for conn

ecting the WiFi modem router to an

ADSL line

Note: An ADSL port can send data over an ADSL line at one speed and

receive it at another speed.

2. USB port for connecting USB storage devices like flash drives, hard drives, or USB printers

3. Four Gigabit

Ethernet RJ-45 LAN ports for cabling the WiFi modem router to the local

computers

4. One Gigabit Ethernet WAN port for connecting the WiFi modem router to a fiber or cable

modem

Note: You can use either the ADSL or Gigabit Ethernet port for WAN

connectivity.

5. Reset button

See Factory Settings on page 141

for information about the Restore Factory Settings

button and the factory setting values.

6. Power On/Of

button