User's Manual

VPN Configuration
159
N300 Wireless ADSL2+ Modem Router DGN2200v4
d. Select the Encapsulation Protocol (ESP) check box.
e. In the Encrypt Alg drop-down list, select the type of encryption. In this example, use
T
riple DES.
f. In the Hash Alg drop-down list, select SHA-1.
g. In the Encapsulation drop-down list, select T
unnel.
h. Leave the Authentication Protocol (AH) check box cleared.
7. Save the VPN Client settings.
From the File menu at the top of the Security Policy Editor window, select Save.
After you have configured and saved the VPN client information, your PC automatically
opens the VPN connection when you attempt to access any IP addresses in the range of
the remote VPN router
’s LAN.
8. Check the VPN connection.
To check the VPN connection, you can initiate a request from the remote PC to the VPN
router
’s network by using the Connect option in the modem router screen:
Right-click the system
tray icon to open the
pop-up menu.
Since the remote PC has a dynamically assigned WAN IP address, it has to initiate the
request.
a. Right-click the system tray icon to open the pop-up menu.
b. Select Connect to open the My Connections list.
c. Select toDGN2200.
The modem router reports the results of the attempt to connect. Once the connection is
established, you can access resources of the network connected to the VPN router
.
Right-click the system
tray icon to open the
pop-up menu.
To perform a ping test using this example, start from the remote PC: