User's Manual
Table Of Contents
- N300 Wireless ADSL2+ Modem Router DGN2200v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Virtual Private Networking
- 11. Troubleshooting
- A. Supplemental Information
- B. VPN Configuration
- C. Notification of Compliance
Virtual Private Networking
118
N300 Wireless ADSL2+ Modem Router DGN2200v4
4. Fill in the Connection Name field and pre-shared key fields. Select the radio button for A
remote VPN Gateway, and click Next.
5. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next.
The Step 3 screen displays.
6. Fill in the IP
Address and Subnet Mask fields for the target endpoint that can use this tunnel,
and click Next.
7. Specify the local LAN address and subnet mask, and click Next.
The VPN Wizard Summary screen displays:
To view the VPNC-recommended authentication and encryption settings used by the
VPN Wizard, click the here link.