User's Manual
Table Of Contents
- N300 Wireless ADSL2+ Modem Router DGN2200v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Virtual Private Networking
- 11. Troubleshooting
- A. Supplemental Information
- B. VPN Configuration
- C. Notification of Compliance
Virtual Private Networking
117
N300 Wireless ADSL2+ Modem Router DGN2200v4
The LAN IP address ranges of each VPN endpoint have to be different. The connection will
fail if both are using the NETGEAR default address range of 192.168.0.x.
To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Log in to Gateway
A on LAN A.
2. Select Advanced >
Advanced - VPN > VPN Wizard.
3. Click Next.
Gateway_A GW_A 192.168.0.1 255.255.255.0 14.15.16.17
Gateway_B GW_B 192.168.3.1 255.255.255.0 22.23.24.25
Table 7. Gateway-to-Gateway VPN Tunnel Configuration Worksheet
Parameter Value to Be Entered Field Selection