User's Manual
Table Of Contents
- N300 Wireless ADSL2+ Modem Router DGN2200v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Virtual Private Networking
- 11. Troubleshooting
- A. Supplemental Information
- B. VPN Configuration
- C. Notification of Compliance
Hardware Setup
11
N300 Wireless ADSL2+ Modem Router DGN2200v4
Back Panel
The back panel has the buttons and port connections as shown in the following figure.
ADSL port
Ethernet LAN ports
USB port
On/Off button
Power adapter input
Reset button
Figure 3. Back panel connections and buttons
Label
The label on the bottom of the modem router shows the Restore Factory Settings button,
preset login information, MAC address, and serial number.
Wi-Fi network name
MAC address
Serial
and passwordnumber
Figure 4. Label on modem router bottom
See Factory Settings on page 142 for information about restoring factory settings.