User's Manual

Advanced Settings

Mobile LTE Broadband 11n Wireless Router MBR1516

2. Click Add to display the following screen:

3. In the Route Name field, type a name for this static route (for identification purposes only.)

4. Select the Private check box if you want to limit access to the LAN only. If Private is

selected, the static route is not reported in RIP.

5. Select the Active check box to make this route ef

fective.

6. Type the destination IP address of the final destination.

7. Type the IP subnet mask for this destination. If the destination is a single host, type

255

.255.255.255.

8. Type the gateway IP address, which has to be a router on the same LAN segment as the

Mobile L

TE Broadband 11n Wireless Router.

9. Type a number between 1 and 15 as the metric value.

This va

lue represents the number of routers between your network and the destination.

Usually, a

setting of 2 or 3 works, but if this is a direct connection, set it to 1.

10. Click Apply to

d the static route.