User's Manual

Advanced Settings
82
Mobile LTE Broadband 11n Wireless Router MBR1516
On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following
screen:
Figure 7. Forward traffic to a changing IP address
¾
To set up Dynamic DNS:
1. Register for an account with
one of the Dynamic DNS service providers whose names
appear in the Service Provider list. For example, for DynDNS.org, select
www.dyndns.org.
2. Select the Use a Dynami
c DNS Service check box.
3. Select the name of your Dynamic
DNS service provider.
4. Type the host name (or domain name) that your Dynamic DNS service provider gave you.
5. Type the user name for your Dynamic DNS account. This is the name that you use to log in
to
your account, not your host name.
6. Type the password (or key) for your Dynamic DNS account.
7. If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can
select the Use W
ildcards check box to activate this feature.
For example, the wildcard feature causes *.yourh
ost.dyndns.org to be aliased to the
same IP address as yourhost.dyndns.org.
8. Click Apply to
save
your configuration.
Static Routes
Static routes provide additional routing information to your router. Under usual
circumstances, the router has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You have to
configure static routes only for unusual cases such as multiple routers or multiple IP subnets
located on your network.