User's Manual

Hardware Setup

Mobile LTE Broadband 11n Wireless Router MBR1516

Label

The label on the side of the router shows the router’s MAC address, serial number, security

PIN, IMEI or ESN number, and factory default login information. It also contains the SSID and

passphrase that is unique to each router.

Restore

Factory

Router label

Router information

- WPS Security PIN

- IMEI or ESN number

- Serial number

- MAC address

Direction of SIM card insertion

with unique

SSID and

passphrase

Settings:

Press for

6 seconds.

Default access address, user name,

and pasword

Figure 4. The label shows unique information about your router

Restore Factory Settings

Locate the small hole outlined in red on the side of the router. Insert a paperclip into the hole

and push for 6 seconds. Depressing the reset button causes the LED to blink briefly. After the

button is held down for more than 6 seconds, the LED will flash AMBER, and then turn green

as the router resets to the factory defaults. See Factory Default Settings on page 99 for

information about restoring factory settings.