User's Manual
Table Of Contents
- N300 Wireless Router with External Antennas WNR1500
- Contents
- 1. Hardware Setup
- 2. Router Internet Setup
- 3. Wireless Settings
- 4. Content Filtering
- Live Parental Controls
- Keyword Blocking of HTTP Traffic
- Block Outbound Traffic to Internet Services
- Set the Time Zone
- Schedule Blocking
- Enable Security Event Email Notification
- View Logs of Web Access or Attempted Web Access
- Allow Inbound Connections to Your Network
- Port Forwarding to a Local Server
- Port Triggering
- 5. Network Maintenance
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
70 | Chapter 6. Advanced Settings
NETGEAR N300 Wireless Router with External Antennas WNR1500 User Manual
Note: The reserved address is not assigned until the next time the
computer contacts the router’s DHCP server. Reboot the computer
or access its IP configuration to force a DHCP release and renew.
To edit or delete a reserved address entry:
1.
Click the button next to the reserved address that you want to edit or delete.
2. Click Edit or Delete.
Advanced Wireless Settings
Select Advanced > Advanced Wireless Settings. The Advanced Wireless Settings screen
displays:
Advanced Wireless Settings
• Enable Wireless Router Radio. If you disable the wireless router radio, wireless devices
cannot connect to the WNR1500 router. If you will not be using your wireless network for
a period of time, you can clear this check box and disable all wireless connectivity.
• Fragmentation Length, CTS/RTS Threshold, Preamble Mode and Transmit Power
Control. The Fragmentation Threshold, CTS/RTS Threshold, Preamble Mode, and
Transmit Power Control options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
• WPS Settings. For information about these settings, see the section, Advanced Wireless
Settings
on page 70.