User's Manual
Table Of Contents
- N300 Wireless Router with External Antennas WNR1500
- Contents
- 1. Hardware Setup
- 2. Router Internet Setup
- 3. Wireless Settings
- 4. Content Filtering
- Live Parental Controls
- Keyword Blocking of HTTP Traffic
- Block Outbound Traffic to Internet Services
- Set the Time Zone
- Schedule Blocking
- Enable Security Event Email Notification
- View Logs of Web Access or Attempted Web Access
- Allow Inbound Connections to Your Network
- Port Forwarding to a Local Server
- Port Triggering
- 5. Network Maintenance
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
42 | Chapter 4. Content Filtering
NETGEAR N300 Wireless Router with External Antennas WNR1500 User Manual
information by contacting the publisher of the application, by asking user groups or
newsgroups, or by searching.
- Enter the starting port and ending port numbers. If the application uses a single port
number, enter that number in both fields.
- If you know that the application uses either TCP or UDP, select the appropriate
protocol. If you are not sure, select Both.
6. Select the radio button for the IP address configuration you want to block, and then enter the
IP addresses in the appropriate fields.
7. Click Add to enable your Block Services Setup selections.
Block Services by IP Address Range
In the Filter Services For area, you can block the specified service for a single computer, a
range of computers (having consecutive IP addresses), or all computers on your network.
Set the Time Zone
The router uses the Network Time Protocol (NTP) to obtain the current time and date from
one of several network time servers on the Internet. You can check and set (if needed) the
time zone to ensure time stamps match your local time.
1. Select Security > Schedule to display the following screen: