User's Manual
Table Of Contents
- Powerline 500 WiFi Access Point (XWN5001)
- Contents
- 1. Getting Started
- 2. Powerline Utility
- 3. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
Powerline Utility
23
Powerline 500 WiFi Access Point (XWN5001)
2. Select Wireless Settings. A screen similar to the following displays:
3. In the field provided enter the network name that you want to use for the access point
network (the network broadcast from the XWN5001 Access Point).
4. If you want to change the wireless security, select a setting from the Wireless Security Type
drop-down list. Enter a passphrase (network password).
5. Click Apply so that your changes take effect.
To search for your NETGEAR router:
1. Click the Search my NETGEAR Router button.
The Access Point detects your wireless network and displays the settings.
2. Confirm that you want to use the same wireless network settings for the Access Point.