User's Manual

Administration
87
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
Name (SSID). The wireless network name (SSID) used by the wireless modem router. The
default names for the 5 GHz ends in -5G to distinguish it from the 2.4 GHz network.
Region. The
geogra
phic region where the wireless modem router is being used. It might be
illegal to use the wireless features of the wireless modem router in some parts of the world.
Channel. Id
entifies
the operating channel of the wireless port being used. The default
channel is Auto. When Auto is selected, the wireless modem router will find the best
operating channel available. If you notice interference from nearby devices, you can select a
different channel. Channels 1, 6, and 11 do not interfere with each other.
Mode. Indicates the wireless communication mode: Up to 54 Mbps, Up to 130 Mbps
(default), and Up to 300 Mbps.
Wireless AP. Indicates wheth
er the radio feature of the wireless modem router is enabled. If
this feature is not enabled, the Wireless LED on the front panel is off.
Broadcast Name. Indicates whether the
wireless modem router is broadcasting its SSID.
Wireless Isolation. Indicates whether wireless connections to the wireless modem router
are prevented.
Wi-Fi Protected Setup. Indicates whethe
r Wi-Fi Protected Setu
p is configured for this
network.
Guest Network (2.4 GHz and 5 GHz)
Name (SSID). The 11N wireless network name (SSID) used by the wireless modem router.
The default names are NETGEAR-Guest and NETGEAR-5G-Guest.
Wireless AP.
Indicates wheth
er the radio feature of the wireless modem router is enabled. If
this feature is not enabled, the Wireless LEDs on the front panel are off.
Broadcast Name. Indicates whethe
r the
wireless modem router is broadcasting its SSID.
Wireless Isolation. Indicates whether wireless connections to the wireless modem router
are prevented.
Allow guest to access My Local Network.
Indicates whet
her any user who connects to this
SSID can access local networks associated with the wireless modem router.