User's Manual

Chapter 2. Advanced Settings | 17
Wireless HD Video and Gaming Adapter WNCE4004
To join a network using WPS after installation:
1. From the Internet adapter menu at http://www.mywifiext.net, under Setup, select WPS.
The following screen displays:
2. Select a radio button.
• Push and Connect (recommended): Either click the
button or press the WPS
button on the rear panel of the Internet adapter.
• PIN Number: Select the radio button, and a PIN displays.
The Internet adapter tries to join the wireless network for 2 minutes if you are using Push
'N' Connect, or 4 minutes if you are using a PIN.
3. Go to the router.
• If you are using Push 'N' Connect, press the router’s WPS button.
• If you are using a PIN, log in to the router and type the PIN from your Internet adapter
in its WPS screen.
4. Go back to the computer that is connected to the Internet adapter, and make sure that you
are connected to the wireless network.
• When WPS is running, the LED blinks, alternating between green and amber.
• If the computer does not connect with WPS, the LED alternately blinks red and green
for 5 seconds.
• If the computer connects using WPS, the LED switches to show the link quality: solid
green, solid amber, or solid red.