User's Manual
Table Of Contents
- N750 Wireless Dual Band Gigabit Router WNDR4300
- Contents
- 1. Hardware Setup
- 2. Set Up Your Internet Connection
- 3. Wireless Settings
- 4. Content Filtering Settings
- 5. Network Maintenance
- 6. USB Storage
- 7. Advanced Settings
- 8. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
Chapter 6. USB Storage | 61
N750 Wireless Dual Band Gigabit Router WNDR4300 User Manual
2. You can use this screen to select a folder, to change the share name, or to change read
access or write access from All-no password to admin.
The password for admin is the same one that is used to log in to the router. By default it is
password.
3. Click Apply for your changes to take effect.
USB Storage Advanced Settings
To configure advanced USB settings, select USB > Advanced Settings. The USB Storage
(Advanced Settings) screen displays:
You can use this screen to specify access to the USB storage device. The settings are as
follows:
• Network Device Name. The default is readyshare. This is the name used to access the
USB device connected to the router from your computer.
• Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here.
Access Method
• Network Connection. Enabled by default, this allows all users on the LAN to have
access to the USB drive.
• HTTP. Disabled by default. If you enable this setting, you can type http://readyshare to
access the USB drive.