User's Manual
Table Of Contents
- N750 Wireless Dual Band Gigabit Router WNDR4300
- Contents
- 1. Hardware Setup
- 2. Set Up Your Internet Connection
- 3. Wireless Settings
- 4. Content Filtering Settings
- 5. Network Maintenance
- 6. USB Storage
- 7. Advanced Settings
- 8. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
32 | Chapter 3. Wireless Settings
N750 Wireless Dual Band Gigabit Router WNDR4300 User Manual
2. Select the Enable Guest Network check box to enable each guest network that you want to
use. Both 2.4 GHz b/g/n) and 5 GHz a/n are available.
3. Specify the settings for the network.
You can specify whether the SSID broadcast is enabled, and whether you want to allow
guests to access your local network. You can also change the SSID.
• NETGEAR strongly recommends that you change the SSID to a different name. Note
that the SSID is case-sensitive. For example, GuestNetwork is not the same as
Guestnetwork.
• For guest networks, wireless security is disabled by default. NETGEAR strongly
recommends that you implement wireless security for the guest network.
4. Select a security option for the guest network and specify the password.
5. When you have finished making changes, click Apply.