User's Manual

16 | Chapter 2. Set Up Your Internet Connection
N750 Wireless Dual Band Gigabit Router WNDR4300 User Manual
Log In to the Router
Log in to the router to view or change settings or to set up the router.
1. Type wwww.routerlogin.net in the address field of your browser and press Enter to
display the login window.
2. Enter admin for the user name and password for the password, both in lowercase letters.
Note: The router user name and password are probably different from the
user name and password for logging in to your Internet connection.
See Types of Logins on page 23 for more information.
The router screen displays as described in Router Interface on page 17.
If you do not see the login prompt:
1. Check the LEDs on the router front panel to make sure that the router is plugged into an
electrical outlet, its power is on, and the Ethernet cable between your computer and the
router is connected to a LAN port.
2. If you connected the Ethernet cable and quickly launched your browser and typed in the
router URL, your computer might need a minute or two to recognize the LAN connection.
Relaunch your browser and try again.
3. If you are having trouble accessing the router wirelessly, NETGEAR recommends that
during setup you use an Ethernet cable to connect your computer so that you can log in to
the router.
4. If you cannot connect to the router, check the Internet Protocol (TCP/IP) properties in the
Network Connections section of your PC Control Panel. They should be set to obtain both IP
and DNS server addresses automatically. See your computer documentation.