User's Manual

84 | Chapter 7. Advanced Settings
N600 Wireless Dual Band Gigabit Router WNDR3700v4 User Manual
Select Advanced > Wireless Repeating Function to display the following screen:
The process is the same for the 2.4 GHz or 5 GHz wireless network.
• Enable Wireless Repeating Function (2.4 GHz/5 GHz). Select the check box for the 2.4
GHz or 5 GHz network to use the wireless repeating function.
• Wireless MAC of this router. This field displays the MAC address for your router for your
reference. You will need to enter this MAC address in the corresponding Wireless
Repeating Function screen of the other access point you are using.
• Wireless Repeater. If your router is the repeater, select this check box.
• Repeater IP Address. If your router is the repeater, enter the IP address of the other
access point.
• Disable Wireless Client Association. If your router is the repeater, selecting this check
box means that wireless clients cannot associate with it. Only LAN client associations are
allowed.
- If you are setting up a point-to-point bridge, select this check box.
- If you want all client traffic to go through the other access point (repeater with wireless
client association), leave this check box cleared.
• Base Station MAC Address. If your router is the repeater, enter the MAC address for the
access point that is the base station.