User's Manual

62 | Chapter 6. USB Storage
N600 Wireless Dual Band Gigabit Router WNDR3700v4 User Manual
• HTTP (via Internet). Disabled by default. If you enable this settings, remote users can
type http://readyshare to access the USB drive over the Internet.
• FTP. Disabled by default.
• FTP (via Internet). Disabled by default. If you enable this settings, remote users can
access the USB drive via FTP over the Internet.
Available Network Folders
• Folder Name.
Full path of the network folder.
• Volume Name. Volume name from the storage device (either USB drive or HDD).
• Total Free Space. The space currently available on the storage device.
• Share Name. You can click the name shown, or you can type it into the address field of
your Web browser. If Not Shared is shown, then the default share has been deleted and
no other share for the root folder exists. Click the link to change this setting.
• Read/Write Access. Shows the permissions and access controls on the Network folder.
Selecting All-no password allows all users to access the network folder. You are
prompted to enter the same password that you use to log in to the router.
Create a Network Folder
1. From the USB Storage (Advanced Settings) screen, click the Create Network Folder
button to open the Create Network Folder screen:
2. Create a folder.
• You can specify the folder’s share name, and change read access and write access
from All-no password to admin.
• The password for admin is the same one that is used to log in to the router. By default
it is password.
3. Click Apply so that your changes take effect.