User Manual
Table Of Contents
- N600 Wireless Dual Band Gigabit Router WNDR3700v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. Storage
- 6. Security
- 7. Administration
- 8. Advanced Settings
- 9. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Advanced Settings
93
N600 Wireless Dual Band Gigabit Router WNDR3700v4
UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP
device that is currently accessing the router and which ports (internal and external) that
device has opened. The UPnP Portmap Table also displays what type of port is open and
whether that port is still active for each IP address.
3. Click Appl
y to save your settings.
IPv6
You can use this feature to set up an IPv6 Internet connection type if genie does not detect it
automatically.
To set up an IPv6 Internet connection type:
1. Select Advanced > Adva
nced Setup > IPv6 to display the following screen:
2. Select the IPv6 connection type from the list. Your Internet service provider (ISP) can
provide this information.
• If your ISP did not p
rovide det
ails, you can select IPv6 Tunnel.
• If you are not sure, select Auto Detect so that
the router detects the IPv6 type that is
in use.
• If your Internet connection does not use PPPoE, DHCP, or
fixed, but is IPv6, select
Auto Config.
• For more det
ailed information about Internet connection types, see the following
sections.
3. Click Appl
y so that your changes take effect.