User Manual

Advanced Settings
87
N600 Wireless Dual Band Gigabit Router WNDR3700v4
 To set up port triggering:
1. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering.
2. Select the Port T
riggering radio button to display the port triggering information.
3. Clear the Disable Port Triggering check box if it is selected.
Note: If the Disable Port Triggering check box is selected after you con
figure
port triggering, port triggering is disabled. However, any port triggering
configuration information you added to the router is retained even though it is
not used.
4. In the Port Tr
iggering Timeout field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designa
ted inbound ports. The inbound
ports close when the inactivity time expires. This is required because the router cannot be
sure when the application has terminated.
5. Click Add S
ervice to display the following screen:
6. In the Service Name field, type a descriptive service name.
7. In the Service User list, select Any (the def
ault) to allow this service to be used by any
computer on the Internet. Otherwise, select Single address, and enter the IP address of
one computer to restrict the service to a particular computer.
8. Select the service type, either TC
P or UDP or both (TCP/UDP). If you are not sure, select
TCP/UDP.