User Manual
Table Of Contents
- N600 Wireless Dual Band Gigabit Router WNDR3700v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. Storage
- 6. Security
- 7. Administration
- 8. Advanced Settings
- 9. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Advanced Settings
84
N600 Wireless Dual Band Gigabit Router WNDR3700v4
To set up port forwarding:
Tip: To ensure that your server computer always has the same IP address,
use the reserved IP address feature of your WNDR3700v4 router.
1. Select Advanced Setup > Port Forwarding
/Port Triggering to display the following
screen:
Port Forwarding is selected as the service type.
2. From the Service Name list, select the service or game that you will host on your network. If
th
e service does not appear in the list, see Add a Custom Service on page 84
.
3. In the corresponding Server IP Address field, enter the last digit of the IP address of your
local computer that will
provide this service.
4. Click Add. The
service appears in the list in the screen.
Add a Custom Service
To define a service, game, or application that does not appear in the Service Name list, first
determine which port number or range of numbers the application uses. Usually, you can
determine this information by contacting the publisher of the application or the relevant user
groups or news groups.
To add a custom service:
1. Select Advanced > Ad
vanced Setup > Port Forwarding/Port Triggering.
2. Select Port Forwarding as the service type.