User Manual
Table Of Contents
- N600 Wireless Dual Band Gigabit Router WNDR3700v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. Storage
- 6. Security
- 7. Administration
- 8. Advanced Settings
- 9. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Storage
54
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Specify Approved USB Devices
For more security, you can set up the router to share approved USB devices only. You can
access this feature from the Advanced Setup menu on the Advanced tab.
To set up approved USB devices:
1. Select Advanced > Ad
vanced Setup > USB Settings. The following screen displays.
2. Click the Approved Devices button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. T
o add an approved USB device, select it from the Available USB Devices list and click Add.
4.
Select the Allow only
approved devices check box.
5. Click Apply so that
your change takes effect.
If you want to work with another USB device, first click the Safely Remove USB Device
button for the currently connected USB device. Connect the other USB device and repeat this
process.