User Manual

Storage
52
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Storage Advanced Settings
You can set up the device name, workgroups, and network folders for your USB device.
 To go to USB Storage (Advanced Settings):
On the USB Settings screen, click the Edit button to display
the following screen:
You can use this screen to specify access to the USB storage device.
• Network Device Na
me. The default is readyshare. This is the name used to access the
USB device connected to the router.
• Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup
name is displa
yed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
• Acce
ss Method. Th
e access methods are described here.
Network Connection. Enabled by defau
lt, this connection allows all users on the LAN to
have access to the USB drive.
HTTP. Enabled by default. You can type http:/
/readyshare.routerlogin.net/shares to
access the USB drive.
HTTP (via Internet). Disabled by defau
lt. If you enable this setting, remote users can
type http://<public IP address/shares> (for example, http://1.1.10.102/shares) or a
URL domain name to access the USB drive over the Internet. This setting supports file
downloading only.
FTP. Disabled by default.
FTP (via
Internet). Disabled by defau
lt. If you enable this setting, remote users can
access the USB drive through FTP over the Internet. This setting supports both
downloading and uploading of files.