User Manual

NETGEAR genie Advanced Home
35
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
on the front of
the router blinks green. When the router estab
lishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
4. Repe
at Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup. Go to the
same Internet Setup screen that you can access from the
dashboard on the Basic Home screen. See Internet Setup on p
age 26.
• Wireless Setup. Go to the same Wireless Settings screen that you can access from the
d
ashboard on the Basic Home screen. See Basic Wireless Settings on p
age 33.
• Guest Network. This selectio
n is a shortcut to the same Guest Network screen that you
can access from the dashboard on the Basic Home screen. See Guest Networks on
page 36.
• WAN Setup. In
ternet (WAN) setup. See WAN Setup on page 36.
• LAN Setup. Local
area network (LAN) setup. See LAN Setup on page 39.
• QoS Setup. Quality of
Service (QoS) setup. See Quality of Service (QoS) Setup on
page 42.