User Manual

NETGEAR genie Basic Settings
23
N600 Wireless Dual Band Gigabit Router WNDR3700v4
• Use These DNS Servers. If you know that your ISP requires specific servers, select this
option. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server
address is available, enter it also.
Router MAC Address. Th
e Ethern
et MAC address that the router uses on the Internet port.
Some ISPs register the MAC address of the network interface card in your computer when
your account is first opened. They accept traffic only from the MAC address of that computer.
This feature allows your router to use your computer’s MAC address (this is also called
cloning).
• Use Defau
l
t Address. Use the default MAC address.
• Use Comput
er MAC Address. The router captures and uses the MAC address of the
computer that you are now using. You have to use the one computer that the ISP allows.
• Use This MAC Address. Enter the
MAC address that you want to use.
Attached Devices
The Attached Device screen shows all computers or devices that are currently connected to
your network.
 To go to the Attached Devices screen:
From the Basic Home screen, select Atta
ched Devices.
Wired devices are connected to the router with Ethernet cables. Wireless devices have
joined the wireless network.
• # (nu
mber). The order in which the device joined the network.
•
IP Address. The IP add
ress that the router assigned to this device when it joined the
network. This number can change if a device is disconnected and rejoins the network.
• MAC Address. The un
ique MAC address for each device does not change. The MAC
address is typically shown on the product label.
• Device Name. If t
he device name is known, it is shown here.
You can click Refre
sh to update this screen.