User Manual
Table Of Contents
- N600 Wireless Dual Band Gigabit Router WNDR3700v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. Storage
- 6. Security
- 7. Administration
- 8. Advanced Settings
- 9. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Troubleshooting
107
N600 Wireless Dual Band Gigabit Router WNDR3700v4
• Does your wireless device support the security that you are using for your wireless
network (WPA or WPA2)?
• If you
want to check the wireless settings for the router, use an Ethernet cable to connect
a computer to a LAN port on the router. Then log in to the router and select Setup >
Wireless Settings (see Wireless Settings Screen Fields on p
age 28).
Note: Note: Be sure to configure both sections (for 2.4 GHz b/g/n and
5 GHz a/n) on the Wireless Settings screen and to click Apply if yo
u
make changes.
Wireless Signal Strength
If your wireless device finds your network, but the signal strength is weak, check these
conditions:
• Is your ro
uter too far from your computer, or too close? Place your computer near the
router, but at least 6 feet (1.8 meters) away, and see if the signal strength improves.
• Is your wireless signa
l blocked by objects between the router and your computer?