User's Manual

Getting Started
5
Universal WiFi Range Extender WN1000RP
Hardware Features
Factory Reset button
WPS button
On/Off button
PC to Extender
Status
Link Rate
Figure 1. Extender
The LEDs on the front show how the Extender is working:
•
Link Rate. This LED indicates a wireless connection between the Extender and the
router.
- Green is best.
- Amber is good.
- Red is poor.
•
Status. This LED is lit when the Extender is powered on.
•
PC to Extender. The LED is lit when the Extender is connected to a PC.
The side panel has the following features:
• On/Off button. Turns the device on and off.
•
WPS button. Press the WPS button to wirelessly connect the Extender to your
router or wireless adapter.
The bottom of the Extender has the following feature:
• Factory Reset button. To use this button, stick a paper clip into the reset hole and hold it
until the Status LED flashes.