User's Manual

Extender Network Settings
18
Universal WiFi Range Extender WN1000RP
Status Screen
When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status
screen displays. You can also select Status from the menu to display this screen:
This screen shows the current settings and the status of your Extender.
You can click Show Statistics to see device performance statistics such as the number of
packets sent and number of packets received for each port. See Show Statistics on page 19.
Hardware and Firmware Version. The model of the hardware and the currently running
firmware version.
GUI Language Version. The currently selected language.
Connection Status to Existing Network
• Name (SSID). Your Extender is set up to connect to this SSID, also called the wireless
name.
• Connection Status. The status of your wireless connection (connected or disconnected).
• Link Rate. The actual transmission (Tx) and receive (Rx) link rate in the current wireless
connection.
Extender IP Info
• MAC Address. The physical address of the Extender, as seen from the local area
network (LAN).
• IP Address. The IP address of the Extender. The default is 192.168.1.250.
• DHCP Client. Identifies the network DHCP client on the wireless network.