User's Manual

Extender Network Settings
14
Universal WiFi Range Extender WN1000RP
 To use the Extender WPS button to connect:
1. Locate the WPS button on the side of the Extender.
WPS button
2. Press the Extender’s WPS button.
For 2 minutes, the Extender attempts to add a wireless client (a computer or other
wireless device) to its wireless network.
3. Within 2 minutes, press the WPS button on your wireless device, or follow the WPS
instructions that came with your wireless device.
Your wireless device is now connected to the Extender.
To log in to the Extender and use WPS to connect:
1. From the Extender menu at http://www.mywifiext.net, select Setup > Add WPS Client.
The following screen displays:
2. Select a radio button.
• Push Button (recommended). Either click the
button or press the WPS
button on the front of the Extender.
• PIN Number. Select the PIN number radio button and enter the client PIN in the field
that displays.
The Extender tries to find the wireless client (the computer) that is attempting to join the
network. If you are using a WPS button, it tries for 2 minutes. If you are using a PIN, it
tries for 4 minutes.
3. Go to your wireless computer. Use its WPS software to try to connect to the Extender.