User's Manual

Administration

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2

Wireless Settings (2.4 GHz and 5 GHz)

The following settings are displayed:

Name (SSID). The wireless network name (SSID) used by the wireless modem router. The

default names for the 5 GHz ends in -5G to distinguish it from the 2.4 GHz network.

Region. The geographic region where

the wireless modem router is being used. It might be

illegal to use the wireless features of the wireless modem router in some parts of the world.

Channel. Identifies the ope

rating channel of the wireless port being used. The default

channel is Auto. When Auto is selected, the wireless modem router will find the best

operating channel available. If you notice interference from nearby devices, you can select a

different channel. Channels 1, 6, and 11 will not interfere with each other.

Mode. Indicates the wireless communication mode: Up to 54 Mbps, Up to 130 Mbps

(default), and

Up to 300 Mbps.

Wireless AP.

Indicates whether the

radio feature of the wireless modem router is enabled. If

this feature is not enabled, the Wireless LED on the front panel is off.

Broadcast Name. Indicates whethe

r the wire

less modem router is broadcasting its SSID.

Wireless Isolation. Indicates wh

ether wireless connections to the wireless modem router

are prevented.

Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is con

figured for this

network.