User Manual
Table Of Contents
- N300 Wireless Gigabit Router with USB Model JNR3210
- Contents
- 1. Hardware Setup
- 2. Router Internet Setup
- 3. Wireless Settings
- 4. Content Filtering
- Live Parental Controls
- Keyword Blocking of HTTP Traffic
- Block Outbound Traffic to Internet Services
- Set the Time Zone
- Schedule Blocking
- Enable Security Event Email Notification
- View Logs of Web Access or Attempted Web Access
- Allow Inbound Connections to Your Network
- Port Forwarding to a Local Server
- Port Triggering
- 5. Network Maintenance
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
Chapter 1. Hardware Setup | 7
NETGEAR N300 Wireless Gigabit Router with USB JNR3210 User Manual
Unpack Your Router
Your box should contain the following items:
• N300 Wireless Gigabit Router with USB Model JNR3210
• AC power adapter (plug varies by region)
• Category 5 (Cat 5) Ethernet cable
• Installation guide with cabling and router setup instructions
If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton and original packing materials, in case you need to return the product for repair.
Hardware Features
Before you cable your router, take a moment to become familiar with the label and the front
and back panels. Pay particular attention to the LEDs on the front panel.
Label
The label on the bottom shows the router’s MAC address, serial number, security PIN, and
login information.
MAC address
Serial
WPS Security
number
PIN
Figure 1. Label on router bottom