User Manual
Table Of Contents
- N300 Wireless Gigabit Router with USB Model JNR3210
- Contents
- 1. Hardware Setup
- 2. Router Internet Setup
- 3. Wireless Settings
- 4. Content Filtering
- Live Parental Controls
- Keyword Blocking of HTTP Traffic
- Block Outbound Traffic to Internet Services
- Set the Time Zone
- Schedule Blocking
- Enable Security Event Email Notification
- View Logs of Web Access or Attempted Web Access
- Allow Inbound Connections to Your Network
- Port Forwarding to a Local Server
- Port Triggering
- 5. Network Maintenance
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
Chapter 4. Content Filtering | 51
NETGEAR N300 Wireless Gigabit Router with USB JNR3210 User Manual
To set up port triggering:
1.
Select Advanced > Port Forwarding/Port Triggering and then select the Port
Triggering radio button. The port triggering information displays.
2. Clear the Disable Port Triggering check box.
Note: If the Disable Port Triggering check box is selected after you
configure port triggering, port triggering is disabled. However, any
port triggering configuration information you added to the router is
retained even though it is not used.
3. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls
the inactivity timer for the designated inbound ports. The inbound ports close when the
inactivity time expires. This is required because the router cannot be sure when the
application has terminated.
4. Click Add Service.
5. The Port Triggering–Services screen displays.
6. In the Service Name field, enter a descriptive service name.