User's Manual

Advanced

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Wireless Repeating Function

From the main menu, select Wireless Repeating Function to display the following screen:

Field Description

Enable Wireless Repeating Enable this if you wish to use either Bridge mode or Repeater mode,

and then select the mode you want for your environment.

• Wireless Repeater. In this mode, the MVBR1210C will

communicate only with another Base Station–mode wireless

station. You must enter the MAC address (physical address) of the

other Base Station–mode wireless station in the field provided.

WEP / WPA-PSK [TKIP] can (and should) be used to protect this

communication.

• Wireless Base Station. Select this only if this MVBR1210C is the

"master" for a group of Repeater-mode wireless stations. The

other Repeater–mode wireless stations must be set to Wireless

Repeater–mode, using this MVBR1210C's MAC address. They

then send all traffic to this master, rather than communicate

directly with each other. WEP / WPA-PSK [TKIP] can (and should)

be used to protect this traffic. If this option is selected, you must

enter the MAC addresses of the other access points in the fields

provided.