User's Manual

USB Storage

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Note: You need to click Apply for your changes to take effect.

Configure USB Storage Advanced Settings

To configure advanced USB settings, from the router menu, under USB, select Advanced

Settings. The USB Storage (Advanced Settings) screen displays:

You can use this screen to specify access to the USB storage device. The following table

explains the fields and buttons in the USB Storage (Advanced Settings) screen.

Table 9. USB Storage (Advanced Settings)

Fields Description

Network Device Name The default is readyshare. This is the name used to access the USB

device connected to the router from your computer.

Workgroup If you are using a Windows workgroup rather than a domain, the

workgroup name is displayed here.

Access Method Network

Connection

Enabled by default, this allows all users on the LAN to have access

to the USB drive.

HTTP Disabled by default. If you enable this setting, you can type

http://kbserver.netgear.com/products/MVBR1210C-1BMCNS.asp to

access the USB drive.

HTTP (via

Internet)

Disabled by default. If you enable this setting, remote users can type

http://kbserver.netgear.com/products/MVBR1210C-1BMCNS.asp to

access the USB drive over the Internet.

FTP Disabled by default.

FTP (via

Internet)

Disabled by default. If you enable this setting, remote users can

access the USB drive through FTP over the Internet.