User's Manual

Wireless Network Configuration

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Configuring WEP

Note: If you use a wireless computer to configure wireless security

settings, you will be disconnected when you click Apply.

Reconfigure your wireless computer to match the new settings, or

access the router from a wired computer to make further changes.

¾ To configure WEP data encryption:

1. Log in to the router as described in Log In to Your Router on page 12.

2. From the main menu, select Wireless Settings to display the Wireless Settings screen.

Security Options None Use this setting to establish wireless connectivity before

implementing wireless security. NETGEAR strongly recommends that

you implement wireless security.

WEP Use encryption keys and data encryption for data security. You can

select 64-bit or 128-bit encryption. See Configuring WEP on page 28.

WPA-PSK (TKIP) Allow only computers configured with WPA to connect to the router.

See Configuring WPA, WPA2, or WPA + WPA2 on page 30.

WPA2-PSK (AES) Allow only computers configured with WPA2 to connect to the router.

See Configuring WPA, WPA2, or WPA + WPA2 on page 30.

WPA-PSK (TKIP) +

WPA2-PSK (AES)

Allow computers configured with either WPA-PSK or WPA2-PSK

security to connect to the router. See Configuring WPA, WPA2, or

WPA + WPA2 on page 30.

Table 6. Wireless setting (continued)

Settings Description