User's Manual

Connecting to the Internet

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

When you first connect to your router during installation, a Setup Wizard displays. For help

using the Setup Wizard to configure your Internet and wireless network, see the Mobile Voice

HSPA+ Broadband 11n Wireless Router MVBR1210C Installation Guide.

After the initial configuration, you can use your Web browser to log in to the router to view or

change its settings. Links to Knowledge Base and documentation are also available on the

router main menu.

Note: Your computer must be configured for DHCP. For help configuring

DHCP, refer to the documentation that came with your computer.

When you have logged in, if you do not click Logout, after 5 minutes of no activity the router

automatically logs you out.

¾ To log in to the router:

1. Type http://www.routerlogin.net in the address field of your browser, and then press

enter to display the login window.

2. Enter admin for the user name and your password (or the default, password).

For information about how to change the password, see Changing the Built-In Password

on page 77.

Note: If you do not remember your password, you can restore the router to

its factory default settings, which will reset the password. See

Factory Default Settings on page 115.

3. If the router has not been configured, the Smart Wizard screen displays. After the router has

been configured, one of the following screens appears: